IP POE Wall Speaker RH602P
 

Descriptions & Features
The RH602P is a IP based POE wall mount speaker is powered by PoE+network switch through CAT5 or
CAT6 connection - no external power supply is required.
Built-in class D 30W power amplifier circuit;provides effective use of power,the system outputs Power: 25W
(when POE power supply), 30W (DC24V/2A).
The speaker unit in the system is of the coaxial type with an 5.25 woofer of polypropylene,an inverted
rubber surround,and a 1 polyamide soft dome tweeter mounted on a post,these two drivers are coupled
through a built-in capacitor bypass crossover.
This speaker system has excellent dispersion,wide bandwidth and a smooth frequency response which
makes this the top choice for voice paging,playing music,emergency notification alerting and bell
scheduling applications.

Features:
※ 5.25 inch woofer + 1 inch tweeter;
※ Support protocol: RTP, UDP, TCP/IP, FTP;
※ Support POE general international standard IEEE 802.3at (25.5W) protocol;
※Integrated Class D amplifier .
※ PoE+powered without a need for local power.
※RJ45 connection for audio from PoE+Ethernet.
※ 5.25” polypropylene cone with inverted rubber surround.
※1” Polyamide dome tweeter.
 

Specification:
Amplifier Type : Class D
Power Supply:  PoE or DC24V(2A)
Rated Power:  Power Over Ethernet: 25W
DC24V(2A): 30W
LAN Connector:  RJ45
Transmission Speed : 10/100Mbps
Communication Protocol : TCP/IP, UDP, IGMP
Sampling Rate : 8K~48KHz
Audio Bit Rate : 8K~512Kbps
Speaker Driver : 5.25” woofer, 1” tweeter
Sensitivity(1m,1w):  89dB±3dB
Dimensions (mm) : 285×170×190mm
Material : ABS enclosure,metal grille
Net Weight (kg) : 2.5 kg