IP POE Ceiling Speaker RH605P
Descriptions & Features
The RH605P is a IP based coaxial ceiling speaker is powered by PoE+network switch through CAT5 or
CAT6 connection - no external power supply is required.
Built-in Class D amplifier provides effective use of power,the system
outputs rated power Power: 25W (when POE power supply), 30W
The speaker unit in the system is of the coaxial type with an 6.5 woofer
of polypropylene,an inverted rubber surround,and a 1 polyamide soft
dome tweeter mounted on a post,these two drivers are coupled
through a built-in capacitor bypass crossover.
This speaker system has excellent dispersion,wide bandwidth and a
smooth frequency response which makes this the top choice for voice
paging,playing music,emergency notification alerting and bell scheduling applications.
※ 6.5 inch woofer + 1 inch tweeter;
※ Support protocol: RTP, UDP, TCP/IP, FTP;
※ Support POE general international standard IEEE 802.3at (25.5W) protocol;
※Integrated Class D amplifier .
※ PoE+powered without a need for local power.
※RJ45 connection for audio from PoE+Ethernet.
※ 6.5” polypropylene cone with inverted rubber surround.
※1” Polyamide dome tweeter.
Amplifier Type : Class D
Power Supply : PoE or DC24V(2A)
Rated Power : Power Over Ethernet: 25W
LAN Connector: RJ45
DC24V Connector : Phoenix connector
Transmission Speed : 100Mbps
Communication Protocol : TCP/IP, UDP, IGMP
Sampling Rate : 8K~48KHz
Audio Bit Rate : 8K~512Kbps
Speaker Driver: 6.5” woofer, 1” tweeter
Sensitivity(1m,1w) : 89dB±3dB
Frequency Response: 90Hz~20KHz(±3dB)
Dimensions (mm) : Ø240*155mm
Cutting Hole (mm) : Ø210mm
Material: ABS enclosure,metal grille
Net Weight (kg) : 2.4 kg